Laboratory

High-throughput analytics for laboratories

Through a close and creative collaboration with a major customer, three high-throughput applications have already been fully developed. All three are already in routine use and cover three of the most important measurement applications, with enormous sample numbers worldwide.

Applications

TPH-method

The total hydrocarbon content or H53 method could be made faster by a factor of 20. The cycle time is 70 seconds. Here, the content of hydrocarbons in a sample is quantitatively determined in conformity with the standard with little discrimination between C20 and C40.

More information on request

VOC-method

The method for measuring volatile substances is carried out with a headspace sample introduction. Up to 90 substances can be quantitatively determined within 3.5 minutes. A speed improvement by a factor of 5 compared to an already highly optimised method was achieved.

More information on request

PAH-method

The measurement of polycyclic aromatic hydrocarbons (PAHs) is also very widely used. The method developed takes 2.5 minutes cycle time and resolves the critical pairs in accordance with the standard.

More information on request

Applications Overview

Want to know more?

Technology

How is it possible to achieve these high measurement speeds with full analytical performance and stability? The secret lies in the "flow field principle" for generating a thermal gradient...

Advantages

Speed, high quality of analyses, low consumption of energy and chemicals - this is what distinguishes HyperChrom. This reduces costs and is good for the environment at the same time.

Industries

In addition to laboratory use, the HyperChrom GC also opens up new applications for industry. With optimized process monitoring and control, better products can be developed and costs saved.